Bill Mellon, CPYB®
Edwards Yacht Sales
510 Brookside Drive
Clearwater, FL, US
Office: 727.449.8222
Mobile: 727.421.4848
Bill@EdwardsYachtSales.com

2006 Custom Timmons 499
Boat Type: Catamaran Address: Tarpon Springs, FL, US Price: $139,900

Overview

This is a project boat!  Many projects are underway or completed.  Motors, Transmissions, Running Gears, Hull Bottom are the major projects completed.  Read the maintenance section for addition recent completed repairs or projects. 

Please read through all specs (including broker comments) and with an investment of time and resources, the new owner of this catamaran will have one of the best catamaran values on the market.  All facilities are nearby with railways and experienced marine specialists.

Specifications

Basic Information

Manufacturer: Custom Vessel Name:
Model: Timmons 499 Boat Type: Catamaran
Year: 2006 Hull Material: Aluminum
Category: Sail Hull Type:
Condition: Used Hull Color:
Location: Tarpon Springs, FL, US Designer:
Available for sale in U.S. waters: Yes Flag of Registry:

Dimensions & Weight

Length: 49 ft - 14.94 meter Draft - max: 7 ft - 2.13 meter
LOA: 49 ft 9 in - 15.16 meter Bridge Clearance: -
Beam: 26 ft - 7.92 meter Dry Weight: -

Engine

Make: Engine Type: Inboard
Model: 19 TDI Drive Type:
Engine(s): 2 Fuel Type: Diesel
Hours: 1450 Horsepower: 90 (Individual), 180 (combined)
Cruise Speed: - Max Speed: -
Range: - Joystick Control: No

Tank Capacities

Fuel Tank: 50 gallons - 2 tank(s) Holding Tank: 35 gallons - 2 tank(s)
Fresh Water Tank: 80 gallons - 2 tank(s)    

Accommodations

Total Cabins: 4 Crew Cabins: -
Total Berths: 3 Crew Berths: -
Total Sleeps: - Crew Sleeps: -
Total Heads: 2 Crew Heads: -
Captains Cabin: No    

Descriptions

Accommodations


Galley


Electrical


Electronics


Power


Broker's Comments

This example sailed to Jamaica and its' 65 ft rotating mast was damaged in route early in its' life. It was fitted with a shorter 50 ft mast for return to the United States. 

The very lightly used original sails are still onboard.

The best client for this vessel is someone who wants a truly unique, fast and secure 50 ft catamaran and is willing to bring back this boat to it's original condition.

The most logical approach would be to secure another 65 ft mast and new rigging to use the excellent sail inventory.

The hulls appear to be in very good condition and major issue have been addressed (however one of the original dagger boards is missing) and the interior will take very little effort to bring back the luster of the custom woodwork.

The boat as been sand blasted inside, painted with epoxy primer Ameron Coatings (Armershield)  spray insulation 1-1/2 inch to cover all t-bar, and wall over it with Nida Core double layer fiberglass with JB Martin fiber material cover.  Gelcoat surface finished all the inside walls which makes a double insulation.  Outside paint is also Amershield epoxy primer and paint. Side was epoxy clear over mill finish.

The cherry wood marine A/1 9 ply. 3/4 inch been use for all cabinet and full hard cherry wood molding   Hull and deck constructed of 4mm plate. Cabin and canopy constructed of 4mm plate as well.

The original owner/builder pictures from the years 2006/2007. The other pictures are from May 2018.

Exterior highlights of work needed:

New 65 Mast w/ Rigging, New Netting, New Stanchions & Lifelines, Aluminum Cleaning, Painting, Reconditioning Dagger Board & fabricating new Dagger Board, New Helm Seat, New Cockpit and Cabin Windows, Repair (welding) near mast step, etc. etc.

Interior highlights of work needed:

Repairs of water damage at bottom of mast step, finishing wood work around ceiling hatches, installing doors to sleeping cabins, replacing backup bilge pumps, replacing older water maker with newer water maker (additional parts needed), heads needs pump seals replaced or repaired, etc. etc.

Note:  Personal Items and Scuba Tanks/Gear are excluded as equipment included.



Measurements


Sails & Rigging

The Original 65 ft Mast of this vessel was broken on its way to the Caribbean by the original owner/builder.  Currently, there is a used temporary 50 ft mast w/ sails from a 42' Manta installed.

The original 65' sails are in very good condition 

The used 50' sails are in good condition

Winches:



Recent Maintenance

Current owner has had 



Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Gallery

Location Map

Bill Mellon, CPYB®
Edwards Yacht Sales
510 Brookside Drive
Clearwater, FL, US
Office: 727.449.8222
Mobile: 727.421.4848
Bill@EdwardsYachtSales.com